ENLIGHT 8309964 2X 300W Redundant Power Supply for EN-8950 5U Rack Mount Chassis

Dimensions: 13" x 7" x 3"
Input range: 100-240VAC auto range , single phase
Frequency: 47-63Hz
Input current: 7A max. @115VAC, 3.5A max. @230VAC, full load
Inrush current; not exceed 60 amps peak at 100 vrms input voltage, measured at cold start
Efficiency: 63% min, at low line 110/220 VAC full load
EMI/EMC: FCC Part 15J Class B, CISPR22/EMC directive 89/336
Maximum power: 300 W Max
Output: 5V @ 31A, 12V @ 8A, 3.3V @ 12V, -5V @ 0.3A, -12V @ 0.4A, +5VSB @ 0.8A
Hold-up time: 16ms min, at maximum o-p (300w) 100v, 50Hz
O/P rise time: less than 100 ms (10% ~ 90% of 0/p Voltage)
Short circuit protection: all outputs short to ground should not damage the power supply
Over current protection: Single power supply operation
Leakage current: 0.75mA at 100 Vac/60Hz
Power good: the unit has an active high TTL compatible signal capable of
Sinking 5mA and sourcing 200 uA. This signal becomes active within 100
~ 500 ms from +5V output reaching steady state. It become inactive at least 1 ms before +5V drop below 4.75V
Operation n temperature: 5-40C
Storage temperature: -20-60C
Humidity: 5-95% RH

1x 24pin ATX
1x 20pin ATX
1x 6pin AUX connector
1x 4pin P4 connector
11x 4pin Molex connector
2x 4pin Berg connector (floppy)
1x 10pin
1x special 2pin connector
1x special 6pin connector